The Design House 791640 Scroll 2-Way Latch Entry Door Handle accepts a key on one side of the lock but is operated by a turn-button knob on the other side. Finished in oil-rubbed bronze and designed for left or right-hand doors, this handle fits the two most common backsets in the U.S. (2-3/4 inches and 2-3/8 inches). The 1/2 inches latch bolt is plated in nickel and does not budge once in place. Use this handle on standard 1-3/8 inches and 1-3/4 inches thick doors. This product has a 1 inch by 2-1/4 inches radius corner faceplate. If you are preparing your door for installation, the cross bore should be 2-1/8 inches in diameter and the edge bore should be 1 inch in diameter. This product is ANSI Grade-3 certified and rated for residential security.