Cambridge Satin Nickel Keyed Entry Door Knob
The Design House 753327 Cambridge 2-Way Latch Entry Door Knob is finished in satin nickel and designed for left or right-hand doors. The flat ball handle fits comfortably in your hand, and the satin nickel finish matches your homefoots decor. This knob fits the two most common backsets in the U.S. (2-3/4 inches and 2-3/8 inches). The 1/2 inches latch bolt is plated in nickel and does not budge once in place. With privacy in mind, this product accepts a key on one side of the lock but operates by a turn-button knob on the other side. Use this knob on standard 1-3/8 inches and 1-3/4 inches thick doors. This product has a 1 inch by 2-1/4 inches radius corner faceplate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8 inches in diameter and the edge bore should be 1 inch in diameter. This product is ANSI Grade-3 certified and rated for residential security.
- Finished in satin nickel and designed for left or right hand doors
- Fits 2-3/4-inch and 2-3/8-inch backsets; Fits 1-3/8-inch and 1-3/4-inch thick doors
- Entry Lock; operated by a key on the exterior and is by a turn-button knob on the interior.
- Length: 2.625
- Width: 2.56
- Height: 2.625
- Weight: 1.34
- Spec Sheet: Click here to download