Ball Keyed Entry Door Knob in Polished Brass
Details
The Design House 782938 Ball 2-Way Latch Entry Door Knob accepts a key on one side of the lock but is operated by a turn-button knob on the other side. Finished in polished brass and designed for left or right hand doors, this knob fits the two most common backsets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry knobs are often used on front doors and back doors. Use this knob on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product is ANSI Grade-3 certified, which means this knob is rated for residential security. Designed and manufactured by Design House, the trusted source for quality lighting, hardware, plumbing, kitchen, and bath products for every taste and budget.
- Finished in polished brass and Designed for left or right hand doors
- Fits 2-3/4-inch and 2-3/8-inch backsets; Fits 1-3/8-inch and 1-3/4-inch thick doors
- Entry Lock; operated by a key on the exterior and is by a turn-button knob on the interior.
Specifications
- Length: 2.625
- Width: 2.56
- Height: 2.625
- Weight: 1.34
- Warranty: 5-Year limited warranty
- Spec Sheet: Click here to download